oshkosh t1500 fire rescue ARFF 1/12 scale

[semijoe]

next i cut 3 pieces of shrink tube and cut one of the lights off the main

ok, this is how i did this end of it, now i have to make 3 more, after this i will show you how to do the other end of it

all 4 are made, next step . i drill a whole in the deck of the truck. the piece will be glued in

[semijoe]

next i cut another sleeve that fits over light bucket pole but is smaller then the deck sleeve . will also attach the wire tip/plug

next i flipped the deck upside down, yellow/black wires are the 4 search lights, the red/black with white tips are for extras light for boom later. the red/black wire with black tip is power for the lights

the search light are up and working

the boom lights are working also

[chassisdude]

When are you gonna build all the little robotic men to run this thing... Great stuff dude...

[Dr Dave]

Far out Joe! This is one wild machine! Great vids, but can't I wait to see this thing in full action at an emergency call out.

I seem to recall some time ago you may have said that it will pump water from the tank. Is that still going to happen?

[semijoe]

Far out Joe! This is one wild machine! Great vids, but can't I wait to see this thing in full action at an emergency call out.

I seem to recall some time ago you may have said that it will pump water from the tank. Is that still going to happen?

I was not going to, but that was me being alittle scare from the last meltdown. but im over that

I just purchased a lighter water tank and went with a different kind of pump. still searching for a siren

this will be fully functional as planned