A new MOTM nomination...
08-19-20, 08:01 PM
The dash upgrade kit is finally ready :-) [/url]
The transaxle was lightly textured and new bolts and drain plugs were machined for it.
The engine blocks are ready. Finally, I soft soldered the "lid" earlier as foreseen because I will need the completed blocks to do the cylinder heads...
Thank you for your obviously informed explanation. Knowledge like that does go a long way to help in explaining the situation. Now, as for your...
It's a different world today. Here's my unresearched theory: Back then manufacturers weren't required to pass the full cost of production on to the...
Thank you Don. These are great suggestions. I'm going to do a bit of online shopping for needles now! Cheers. Brad
Each engine block has 6 expansion plugs; I reproduced them as good as I could. Then came the moment I have to drill the holes into the crankcase,...
Happy Thanksgiving! Long pins, hemming pins from a fabric shop, or on -line, specimen pins used by museums for insects, . . . super glued...
Downloads
The dash upgrade kit is finally ready :-) [/url]
ALTAYA Ford GT40 1/8th