
Builder Last Online: Jul 2016


Model Scale: 1/8
Rating:
Thanks: 0

Started: 04-21-13
Build Revisions: Never

well its been awhile . but wait to see what i have instored for this project.
i started with a bruiser stock chassis
i cant use the center cross member, or the front cross member

rc4wd has dual shock mounts for the tf2, but you can also put them on the bruiser chassis. i only had to drill one hole

today ive install a 12mm hub convesion kit made by rc4wd part # Z-S0107
this will let me put any style tire and rim on it. but if you deside to keep the stock axles , rc4wd also make a new style rim for the bruiser only
Z-W0030
also if you look closely, you ll notice that all the white plastic parts that come with the bruiser kit is black . tamiya
makes a complete black set


i started with a bruiser stock chassis
i cant use the center cross member, or the front cross member

rc4wd has dual shock mounts for the tf2, but you can also put them on the bruiser chassis. i only had to drill one hole

today ive install a 12mm hub convesion kit made by rc4wd part # Z-S0107
this will let me put any style tire and rim on it. but if you deside to keep the stock axles , rc4wd also make a new style rim for the bruiser only
Z-W0030
also if you look closely, you ll notice that all the white plastic parts that come with the bruiser kit is black . tamiya



Show Complete First Post
Show Your Support
- This build may not be copied, reproduced or published elsewhere without author's permission.Please note: The first post will be displayed at the top of every page.
Bookmarks