
Builder Last Online: Nov 2020


Model Scale: 1/8
Rating:
(1 votes - 5.00 average)
Thanks: 0

Started: 02-10-10
Build Revisions: Never

Several Sundays back I posted some pictures of my latest project for the Sunday build thread. I thought I would start a new thread here with a couple of pictures of my current progress. The complete build series can be found here: A Work In Progress
The engine has a bore and stroke of 1.00x1.25. The crankcase is aluminum as are the heads. The crank and rods are 1144 stressproof steel. It has a gear oil pump to lube the cams and rods. The crank rides on sealed ball bearings. The valves are stainless steel with bronze guides and steel seats. The pistons have two compression rings. The ignition will have a Hall effect trigger with an electronic spark.
gbritnell
The engine has a bore and stroke of 1.00x1.25. The crankcase is aluminum as are the heads. The crank and rods are 1144 stressproof steel. It has a gear oil pump to lube the cams and rods. The crank rides on sealed ball bearings. The valves are stainless steel with bronze guides and steel seats. The pistons have two compression rings. The ignition will have a Hall effect trigger with an electronic spark.
gbritnell
Build Photos
Show Complete First Post
Show Your Support
- This build may not be copied, reproduced or published elsewhere without author's permission.Please note: The first post will be displayed at the top of every page.
Bookmarks