On the Toronado model, I used the Dow Corning Sylgard. It's a 2 components product: a white liquid and a black liquid mixed 1:1. I did not notice any...
Now that the valve covers are done, I'm beginning other covers: the wheelcovers. The cover itself will be done in 2 pieces: a small one, like a cheap...
While I was waiting for the brass to turn the forms for the wheelcovers, I decided to begin another pair of interesting parts: the valve covers. For...
On April 16 2010, I poured some silicone into the polyester molds. After 6 hours, I was able to remove the molds; it is a success! The tire is nice,...
Meanwhile, the work do continue with the tires. The next step was casting the first half positive mold. I had doubts about its quality: some silicone...
After cleaning, the half mold is pushed back into its initial position. It is now time to pour another batch of silicone to get the second half mold....
On March 21, I prepared the master tire to make negative molds. It is obvious that I have to do 2 half negative molds otherwise I could not take the...
Find one in a museum, go there and take lots of pictures and messure it all over. Research enging if there are any on the marked, or will you give it...
Name: Medal of Generosity 50
This medal is awarded to those who make a donation of $50-$99 to financially support SMC
Name: Medal of Creativity
This medal is awarded to any member that has shown outstanding creativity, in addition to a willingness to help others achieve their model building goals.
Name: Medal of Generosity 100
This medal is awarded to those who make a donation of $100-$499 to financially support SMC
Connect With Us