Close

Page 2 of 6 FirstFirst 1 2 3 4 5 6 LastLast
Results 16 to 30 of 80
    1. Kit: , by (VIP/Sponsor) mouppe is offline
      Builder Last Online: Oct 2011 Show Printable Version Email this Page
      Model Scale: 1/8 Rating:  (3 votes - 4.67 average) Thanks: 0
      Started: 08-28-09 Build Revisions: Never  
      Not Supported

      I recently purchased the 1/8 scale SE5a kit by Hasegawa on Ebay, and although it was missing the plans I was able to obtain a copy from a fellow modeller in Nevada City, California.

      I performed a complete inventory and all parts were in perfect condition, as was the wood and plywood sheets.

      This will be my second build in the series as I built the Sopwith Camel in early 2008. There is a thread following this build elsewhere in the site. In time, I aim to build the Fokker to complete the series. (The fourth kit- the Wright Flier- is 1/16 scale.)

      I have undergone a hiatus from modelling since my workshop was converted into another bedroom (!), but I have just rented a space in an industrial building near my home and office and made it into my workshop. Now work can began on my next three projects- the SE5a, a Pocher Rolls Royce, and the creme de la creme, HMS Vanguard.

      Gentlemen, start your engines!
      Show Complete First Post

      Show Your Support

      • This build may not be copied, reproduced or published elsewhere without author's permission.
        Please note: The first post will be displayed at the top of every page.
    JOIN THE SMC ALLIANCE NOW

  1. Lancair IV's Avatar VIP/Sponsor
    Name
    Rob
    Join Date
    May 2008
    Posts
    590
    Outstanding Mouppe.....How big will the finished model be?

    Cheers
    Rob Byrnes
    Novi, Mi.

    On the Bench
    1:48 Monogram B-17 Flying Fortress (Extreem Detail)
    Scratch build Lancair 235

    In the planning Stages
    1:48 US WWII Bombers B-26, B-29

    Recently Completed
    1:48 Accurate Miniatures P-51
    1:48 Accurate Miniatures P-51A
    1:48 Accurate Miniatures P-36 Apache
    1:48 Tamiya P-51D
    #17

  2. xken's Avatar VIP/Sponsor
    Name
    Kenneth
    Join Date
    Aug 2008
    Posts
    2,328
    This plane was going to be my next scratch build until I started the Model T. I was gathering research material to start it once I finished the Stearman. However, here is a link to the best resource of reference pictures of an SE-5 being restored that you will find in one place on the planet. Scroll down to view all pictures and right arrow through them all or visit monthly postings. Click on SE 5a if you get main index.

    Enjoy! Mémorial Flight Association

    Ken
    #18

  3. mouppe's Avatar VIP/Sponsor
    Join Date
    Aug 2007
    Posts
    301
    This is a 1/8 scale model, so the finished model's wingspan will be just over 1m!

    Ken,

    Thanks for the link. I have seen the photos of that restoration, and I have a link to a reproduction from New Zealand bookmarked as well. Generally, the Hasegawa kits are very faithful representations, and the SE5a is no exception.

    SE.5a Reproduction | The Vintage Aviator

    Mouppe.
    #19

  4. mouppe's Avatar VIP/Sponsor
    Join Date
    Aug 2007
    Posts
    301
    More progress on the fuselage. Everything came out really true so far. Interestingly, not all the spars are parallel, note the 5th and 6th columns from the left in the first picture. This is deliberate.

    One thing to note is that the ends of the wood needs to be as square as possible to provide the largest possible face for glueing, especially when the diameter is only 2 or 3 millimetres. I use a belt sander which normally is too heavy duty for modelling at this scale but it does leave a very flat end and you can achieve very accurate angles which this model requires. For example the rear part of the fuselage tapers at about 7 degrees.

    Mouppe.
    Attached Images Attached Images 1/8 SE5a by Mouppe-dsc00093-jpg  1/8 SE5a by Mouppe-dsc00100-jpg 
    #20

  5. mouppe's Avatar VIP/Sponsor
    Join Date
    Aug 2007
    Posts
    301
    Hi,

    I made some more progress on the fuselage by adding the stringers. This can be a tricky section as the stringers are only 2mm wide and can bend easily. The bulkhead guides are often out of position, so it is best to widen the gaps where necessary and then use a wood filler later to fill any spaces. In hindsight, I would recommend cutting one's own bulkheads rather than using the kit-supplied ones. Once the glue has dried, gentle fairing along and across the stringers will smooth everything out.

    Mouppe.
    Attached Images Attached Images 1/8 SE5a by Mouppe-dsc00102-jpg  1/8 SE5a by Mouppe-dsc00103-jpg 
    #21

  6. Looking good Richard I'm really enjoying watching this build progress, I'm almost half tempted to sell/swap my Sopwith Camel kit for an SE5A any takers??
    Am I right in guessing this kit does not have full only curbside engine detail ?

    Sean
    #22

  7. Daniel's Avatar Established Member
    Name
    Daniel
    Join Date
    Dec 2007
    Posts
    152
    Great build Mouppe, if this turns out anything like your Camel it will be another museum quality piece.

    Last Easter I visited The Australian War Memorial, which has on display one of the few surviving SE5a aircraft.

    Here is a link to their website page with pictures of the SE5a and some others.
    Australian War Memorial - Visitor information

    Below are some pictures I took.;';;'; The plane is unfortunately hanging about 4 metres from the ground in the dark!

    Daniel
    Attached Images Attached Images 1/8 SE5a by Mouppe-100_0107-jpg  1/8 SE5a by Mouppe-100_0108-jpg  1/8 SE5a by Mouppe-100_0112-jpg  1/8 SE5a by Mouppe-100_0114-jpg  1/8 SE5a by Mouppe-100_0125-jpg  1/8 SE5a by Mouppe-100_0128-jpg  1/8 SE5a by Mouppe-100_0129-jpg  1/8 SE5a by Mouppe-100_0130-jpg  1/8 SE5a by Mouppe-100_0131-jpg  1/8 SE5a by Mouppe-100_0132-jpg  1/8 SE5a by Mouppe-100_0133-jpg 
    #23

  8. mouppe's Avatar VIP/Sponsor
    Join Date
    Aug 2007
    Posts
    301
    Hi Sean and Daniel,

    Hope you are doing well and not too sad about the Ashes! There were a couple of great games and I listened to almost every ball.

    Sean you are right about the engine detail. It is very thin. I added a few bolts here and there, but there is practically no wiring or any parts other than the visible cylinders. Certainly nothing like the Camel's Clerget.

    I would not swap the SE5a for the Camel. Whilst the SE5a is rarer and therefore more valuable, it is not as impressive a build as the Camel. If you are planning to build your kit, I would stick with the Camel. Having said that I picked up the SE5a on a rather low buy-it-now on Ebay which made it worthwhile.

    Daniel, thanks for the photos- they are really special as I have only seen British SE5a before. There are I believe 6 original SE5as in existence, one of which is the Aussie one. No 2 Squadron was the only Australian unit equipped with SE5as; originally the unit marking was a white boomerang but this was replaced later with a vertical white stripe forward of the roundel. You can see this in your photo number 3. No 4 Squadron which flew Sopwith Camels also sported the boomerang marking.

    One notable inaccuracy of the kit is the far too strong dark green coloured fuselage skin. According to one of my source readings, "From 1916 onwards, British military aircraft were painted a Khaki Brown colour...550 parts of Yellow Ochre with one part of Lamp Black. This resulted in a dark brown colour as a dry mixture but when mixed with a glossy liquid medium it took on a slight greenish hue under certain light conditions. Therefore...the SE5a would look greenish-brown in colour with the brown predominant. Afer the aircraft had been in service for a time the effects of weather and sun reduced the colour scheme to a very definite brown tone."

    This is exactly what your phots show, but the kit colour is way too green.

    Mouppe.
    Last edited by mouppe; 09-12-09 at 07:14 AM.
    #24

  9. Nortley's Avatar VIP/Sponsor
    Name
    Buck
    Join Date
    Jan 2008
    Posts
    341
    While travelling Australia in 1994, I visited the War Memorial Museum. The Se5 was on the floor then. These are all I have of it, those were the days of film and so many cents a shot, but my trusty OM-1 never let me down.
    Attached Images Attached Images 1/8 SE5a by Mouppe-scan0005-jpg  1/8 SE5a by Mouppe-scan0011-jpg  1/8 SE5a by Mouppe-scan0012-jpg 
    Scorpio - Builds models the way the prototype should have been built.
    #25

  10. mouppe's Avatar VIP/Sponsor
    Join Date
    Aug 2007
    Posts
    301
    Nice. You can see the fuselage is raised behind the cockpit to provide a headrest- some planes had this modification carried out. And the boomerang is visible here.
    #26

  11. Hi there.

    This is my first post at this forum.
    Love to see an active SE5A topic.

    I built mine about 18 years ago and its now gathering dust and is not getting any better in storage.
    Just wondering if somebody is interested in buying it.
    No super built. I would say a 6 or 7 on a 1-10 scale.
    Covered in paper fabric and painted like the real SE5a in the Suthleworth collection.
    I can do 2 things. Keep it and in 10 years its gone or sell it for a fair price and maybe a new owner can make it come to live again.
    Remember shipping will be quite high as I live in the Netherlands.

    Topic starter: If you feel I'm messing up your topic, drop me a line, I'll remove it.
    The same goes for the moderator.

    Hans
    The Netherlands
    #27

  12. hot ford coupe's Avatar VIP/Sponsor
    Name
    Jeffrey
    Join Date
    Sep 2005
    Posts
    7,827
    Welcome to the site, Hans. Don't remove the post. Usually we put the buy-sell items in the Market Place section. If you have built other large scale models, we'd love to see them.
    Sometimes a handful of patience is worth more than a truck load of brains. Have the courage to trust your own beliefs. Don't be swayed by those with louder voices. W.S. Maugham :)
    #28

  13. Hows progress on the build Richard ;';;';?

    Sean
    #29

  14. mouppe's Avatar VIP/Sponsor
    Join Date
    Aug 2007
    Posts
    301
    Sean,

    It's coming along. I have not really been focused on it for the last couple of weeks as I have been building a workbench, but the cockpit is almost ready to be installed. Painting and detailing it was quite laborious, and to complicate matters the SE5a does not come with dial decals unlike the Camel. What I have done is to take a photograph of the cockpit, resized it and cut out the dials. Then I will face the dials with some clear plastic to simulate the glass. The effect is good, particularly at this large scale.

    Since I have a large workspace at my disposal I thought I would take the opportunity to build a big workbench for future projects. You need a big space to handle furniture this big and the tools it requires. The bench is over 6 feet by 2 and a half feet, with a laminated maple top almost 2 inches thick and a 5 inch deep cherry wood apron. It has a twin screw vise at the tail end, and a front vise. I have not built the legs yet, but already it is so massive that it takes two people to lift it!

    Sometimes it feels good to leave the small scale stuff behind and build something LARGE!

    Mouppe.
    #30

  15. sounds great lets see some pics when your done I for one love looking at other peoples workshops.

    Sean
    #31

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Quick Scale Calculator

 
Scale Calculator   Scale Factor   Real Size:     + Deluxe Scale Calculator
  1: th   Which equals Convert measurement: Reset or clear:  
  Any Scale   Scale Size:     + Deluxe Metric Calculator
 
Top