Using 3d software for...
07-19-19, 02:44 AM
How I Build Dioramas.
02-20-19, 09:11 PM
Hi guys! i have been doing a bit of large scale RC model building on my new large scale modeling YouTube channel, Flat Earth Workshop. Please stop...
There are sometimes parts I don't know how to begin them. The knuckles are a good example. I did first the shafts but I had to modify my plan: the...
Greetings, Here I go again. Mucking it up with my crudities amongst such exquisite builds! It looks kind of clunky now, but I am now in the...
The front axle is almost ready. Since the last report, I silver soldered the lower flange, added a sole or shoe (maybe there is a better word) at the...
I found an other one: https://www.youtube.com/watch?v=zy0lrw_qDnk
What kind of acid are you using to color the brass?
Thank you Roger! Half shaft yokes 3D printed by Fraxional. The shafts are brass; the larger one has already been treated with acid for the color. ...
Hello there! What happened here in California was a combination of old established industries moving out. The exchange rate for dollars versus...
Hi guys! i have been doing a bit of large scale RC model building on my new large scale modeling YouTube channel, Flat Earth Workshop. Please stop...
Large Scale RC Build!