Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
Oh one more thing, after you pour your resin, but before it cures, you can "dust" it with charcoal dust, this will only stick to the outer most...
Your other suggestion is not bad at all! Sometimes it's good to beat the horse a bit longer! I will not switch to S.S because I have plenty of that...
Switch from Brass to Stainless Steel? S.S. shim stock can be cut with scissors. And it is a bit more rigid.
Clever idea using the black resin that way!
Hmm. You do have a novel approach! If we can beat this horse a little longer, how's about replacing the Soldered base for plasteline clay? The...
Good theory, Don. Unfortunately, the strips are not 100% regular not straight. Plus, they are not rigid, not at all! The idea to tin the base came...
Another suggestion is to create an oversized version. Longer than you need, using that area to help affix the strips in place, adjusting them as...
Impressive start! An idea I have not tried, to pre-tin the entire surface of the back plate. That is to create an even layer of solder upon the...
Downloads
Oh one more thing, after you pour your resin, but before it cures, you can "dust" it with charcoal dust, this will only stick to the outer most...
1:12 1932 Cadillac V-16 frame and...