
Builder Last Online: Feb 2022


Model Scale: 1/8
Rating:
Thanks: 0

Started: 01-16-18
Build Revisions: Never

I am building a 1/12th scale
Model Factory Hiro
Alfa Romeo 159M. The kit is extraordinarily detailed and accurate, and does not require
scratch built
parts, modified parts, or trans kits. There are a few 1mm and 1.45mm molded bolt heads that could be replaced but I don’t think it’s necessary. This is an
OOB
build, and the diary will showcase the kit rather than any alleged skill or creativity of the builder.
The instructions consist of a series of exploded drawings. From the drawings you create your own assembly plan and determine the best sequence of operations.
It is essential to study the drawings from beginning to end so that you can drill all holes, test fit, and make all necessary adjustments before you begin final assembly.
Below are four photos of the real thing.
Attachment 32497
Attachment 32498Attachment 32499
Attachment 32500



The instructions consist of a series of exploded drawings. From the drawings you create your own assembly plan and determine the best sequence of operations.
It is essential to study the drawings from beginning to end so that you can drill all holes, test fit, and make all necessary adjustments before you begin final assembly.
Below are four photos of the real thing.
Attachment 32497
Attachment 32498Attachment 32499
Attachment 32500
Show Complete First Post
Show Your Support
- This build may not be copied, reproduced or published elsewhere without author's permission.Please note: The first post will be displayed at the top of every page.
Bookmarks