Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
There are no posts in this forum.
My 1/24 scale...
07-08-11, 02:10 AM
Ferrari Arno
07-05-11, 01:51 AM
When I silver soldered the trunk floor from the Mark II, it was basically a flat piece of brass, not so thin, but I got effectively some warpage. I...
Roger, that is 1256°F. Does that high a temperature warp thin brass? I did not realize you were soldering at such high temps.
Thanks for the comments! @ Joe: the soldering rods I will get have a high silver content; the melting point is about 680°C. The jeweler who is...
For silver soldering brass I still use silver solders. I get them from jewellers suppliers, in 0.5mm sheets (for cutting into paillons - little...
Back to your modeling, -really excellent work Roger! I know you don't like getting ahead of yourself, but I have to ask. What is the final...
I too, have over-stocked all the solder I'll ever need for the rest of my life! I also can't resist buying woods. Well figured or attractive...
That tiny stupid support for the pedals took me a long time to understand its general shape! Finally, I got it more or less right; I hope that the...
K-125 (without the letter M). 1946-1951. Brass, bronze, silver, plastic. К-125 @ К-125М
When I silver soldered the trunk floor from the Mark II, it was basically a flat piece of brass, not so thin, but I got effectively some warpage. I...
1:12 1932 Cadillac V-16 frame and...